Chapter 2 • Setting Up the Projection Panel
The power supply has a fixed cord ending in a circular plug with
Power
Connection
five pins. Carefully insert this plug into the power port of the
projection panel.
POWER
Figure 7
The projection panel's POWER port
Find the correct IEC power cord for the location. Plug the female
end into the power supply, and the male end into the wall outlet.
The cables shown below allow connection of IBM-compatible
Computer
Video
(VGA) and Macintosh computers.
Connection
VGA Connector Cable
Macintosh Connector Cable
Figure 8
Computer connector cables
User's Guide • 2–3