Table of Contents
Advertisement
Chapter 2 • Setting Up the Projection Panel
Connector
Panel
AUDIO
S-VHS
AUDIO IN
OUT
LEFT
RIGHT
2–2 • User's Guide
All connections between the projection panel and computer or
video source are made on the side connector panel.
CYCLOPS
VIDEO IN
SERIAL
Figure 6
Connector Panel
AUDIO IN LEFT
AUDIO IN RIGHT
AUDIO OUT
S-VHS
VIDEO IN
SERIAL PORT
CYCLOPS
TO MAC
MONITOR
TO VGA
MONITOR
FROM
COMPUTER
POWER
TO MAC MONITOR
TO VGA MONITOR
Plug Left Channel Audio into the White RCA
Connector.
Plug Right Channel Audio into the Red RCA
Connector.
Stereo audio output.
Plug an S-VHS or S-Video source into this
connector.
This yellow RCA connector is for video input.
Connect a Microsoft-compatible mouse to
this port to navigate menus or draw over the
projected image in "Local Mode", or to control
the computer's mouse functions in "Host
Mode".
Connects the projection panel to the
computer in order to use the optional Cyclops
interactive pointer system, Presentation
Control Software, or a Microsoft-compatible
mouse.
Plug a Macintosh monitor cable into this
connector.
Plug a VGA monitor cable into this connector.
Connect the computer to this DB25
connector.
Plug the power cable from the power supply
into this connector. Then, connect the
appropriate IEC power cord to the universal
power supply.
FROM COMPUTER
POWER
Advertisement
Table of Contents
