Configuring Without Step 7; Requirements - Siemens SIRIUS 3RA6 System Manual

6.3.3

Configuring without STEP 7

6.3.3.1

Requirements

Procedure when configuring IO-Link master and IO-Link Device with S7-PCT Stand-Alone
1. With the Port-Configurator-Tool
compact starters (IO-Link Devices).
Requirements
● The Port-Configurator-Tool
You can either install
download it from the Internet
(http://support.automation.siemens.com/WW/view/en/33102519/133100).
● The associated IO-Link IODD file (IO-Link Device Description) is installed in
You can download the IODD files for the SIRIUS Devices on the Internet
(http://support.automation.siemens.com/WW/view/en/29801139/133100).
6.3.3.2 Configuring without STEP 7
Configuring the IO-Link Device with the Port-Configurator-Tool
1. Start the S7-PCT Port-Configuration-Tool.
2. Create a new project or open an existing project as described in the online help.
3. Select an IO-Link master.
4. Select the compact starter in the hardware catalog of the S7-PCT.
5. Start by parameterizing the compact starter (IO-Link Device).
Additional information is available in the
SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006
S7-PCT (V2.0 or higher)
S7-PCT (V2.0 or higher)
S7-PCT
together with STEP 7 V5.4 SP5 or higher, or you can
S7-PCT
3RA64/3RA65 compact starter with IO-Link
you configure the connected
is installed on the PG/PC.
online help.
6.3 Configuring
S7-PCT
.
101