Siemens SIRIUS 3RA6 System Manual page 70

3RA61/3RA62 compact starter
5.4 Installing/removal
Procedure
For servicing purposes, the compact starter can be removed from the infeed system while
the system is live but at zero current.
Note
The fact that the SIRIUS infeed system for 3RA6 features permanent wiring means that
there is no need to disconnect the main circuit terminals.
Step
1
2
3
Note
The 45 mm adapter for the infeed system for 3RA6 can be removed in the same way.
70
Instructions
Insert a screwdriver into the opening.
Tilt the screwdriver to the right and then
down (see arrow on enclosure lid) so
that you can push the compact starter
forwards by approx. 5 mm.
Move the compact starter forwards to
remove it from the screw-type infeed or
extension block.
Image
SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006