Remove the various covers
Required work steps:
■
Remove keyboard
■
Remove cradle
■
Remove pen
■
Removing the LCD back cover assy
■
Remove battery
■
Remove M.2 module
■
Remove LTE module
■
Remove the camera module
■
Remove pen garage
■
Remove the application key sub board
■
Removing the WWAN antennas
■
Remove SAR antennas
■
Removing the WLAN antennas
■
Remove CMOS battery
■
Removing the USB / audio sub board
■
Remove corner rubbers
■
Remove fan
■
Removing the SmartCard reader
■
Remove mainboard
If it is necessary to replace the LCD assy, release the covers (red rectangle) by guiding them through the recesses (yellow
►
rectangles, lower picture). This procedure applies t all covers.
Page 48 of 64
Required tools:
■
Screwdriver: Phillips, size PH00