Fujitsu STYLISTIC Q7310 Manual page 64

Plastics which contain brominated flame
retardant
Toner cartridges, liquid and paste-like, and
colour toner
Asbestos waste and components which contain
asbestos
Components which contain fire-proof ceramic
fibres
Components which contain radioactive
substances
Mass storage device(s)
Does the product contain mass storage
devices? If so, is any of them soldered to a
circuit board?
Required tools
Phillips screwdriver
Return to Table of Contents
Page 64 of 64
This product may contain plastic parts with
Brominated flame retardants but to the best of
our knowledge we provide this information to
sort them out. Plastic parts location can be
visually identified by their typical design
function for the product (also shown in the
disassembly manual).
Many of these parts (Greater than 25 grams)
are bromine free.
Regardless, these parts are labeled (usually
molded directly into the plastic) per ISO 11469.
A typical label would look like:
> Polymer Abbreviation - FR(xx) <
i.e. > PC+ABS FR(40) <
Flame retardant codes (FR(xx)) are given in
ISO 1043-4. Codes for some Brominated flame
retardants:
14 aliphatic/alicyclic Brominated compounds
15 aliphatic/alicyclic Brominated compounds in
combination with antimony compounds
16 aromatic Brominated compounds (excluding
Brominated diphenyl ether and biphenyls)
17 aromatic Brominated compounds (excluding
Brominated diphenyl ether and biphenyls) in
combination with antimony compounds
22 aliphatic/alicyclic chlorinated and
Brominated compounds
42 Brominated organic phosphorus
compounds
- Plastic parts weighing less than 25 grams may
or may not contain brominated flame
retardants. These smaller plastic parts may to
be finding all over the PC system. It may
especially include: fan, speaker.
Not contained
Not contained
Not contained
Not contained
Mass storage devices are contained, and they
are not soldered to a circuit board.
1