Now carefully lift the mainboard (green arrows).
►
■
When you remove the mainboard, pay attention also to the housing, as the mainboard may be a bit jammed or canted.
■
The device may be equipped with antenna cables even if no WLAN/WWAN module is installed.
■
When assembling the device, if no module is installed make sure to protect the antenna cables from possible short-circuits, e.g. with
ESD adhesive tape.
■
The mainboard is always supplied with a heatsink.
■
The connecting cable between the mainboard and the battery (red rectangle) can be ordered separately and must be removed from
the main board.
Return to Table of Contents
Page 47 of 64