Removing the WWAN antennas
Required work steps:
■
Remove keyboard
■
Remove cradle
■
Remove pen
■
Removing the LCD back cover assy
■
Remove battery
■
Remove pen garage
■
Remove the application key sub board
Picture 1
Remove the two screws M2XL3 (yellow circles).
►
The WWAN antennas are marked by red rectangles.
►
The LTE module is located under the gasket (blue rectangle).
►
Release the two connector locks (yellow rectangles) and remove the flexprint cable.
►
Page 24 of 64
Required tools:
■
Screwdriver: Phillips, size PH00