Removing the fingerprint sensor
Required work steps:
■
Remove keyboard
■
Remove cradle
■
Remove pen
■
Removing the LCD back cover assy
■
Remove battery
Please observe this information when you use the fingerprint sensor!
►
The figure above shows a device configuration with fingerprint sensor (yellow rectangle).
When the fingerprint sensor is used, the fingerprint sub board is integrated in the LCD back cover assy (LCD back cover for
►
SIM W / FP) and must be completely replaced if defective. The fingerprint sub board is not available separately.
Return to Table of Contents
Page 40 of 64
Required tools:
■
Screwdriver: Phillips, size PH00