Remove pen garage
Required work steps:
■
Remove keyboard
■
Remove cradle
■
Remove pen
■
Removing the LCD back cover assy
■
Remove battery
Remove the screw M2XL3 (yellow circle).
►
Remove the adhesive tape and the cable (red flashes).
►
The cable of a SAR antenna (red rectangle) runs through the cable duct (yellow arrows) of the pen garage and must
►
therefore be disconnected (orange circle). On the following page you will find the detailed view.
Remove the pen garage from the device (green arrow).
►
Page 19 of 64
Required tools:
■
Screwdriver: Phillips, size PH00