Removing the LCD back cover assy
Required work steps:
■
Remove keyboard
■
Remove cradle
■
Remove pen
Always ensure there is a static discharge (e.g. by touching a grounded object) prior to commencing with the work.
►
►
The devices and tools being used must not be statically charged.
Only touch the components along the edges or on the areas marked in green (contact points).
►
Contacts and electronic components must not touch when handling components equipped with ESD protection.
►
Further information can be found in the chapter
►
Remove the four M2.5XL6-6.5 screws (blue circles).
Page 11 of 64
Required tools:
■
Screwdriver: Phillips, size PH00
■
Plastic tool
Information on the installation and removal of
components.