Removing / Fitting The Cradle - Fujitsu STYLISTIC Q7310 Manual

Removing / fitting the cradle

► Disconnect the mains plug from the mains outlet.
Remove all cables connected to the STYLISTIC Q7310 and its cradle.
►
Disconnect the STYLISTIC Q7310 tablet from its cradle by pressing the release button (yellow arrow) and pulling the STYLISTIC Q7310
►
upwards (green arrows).
To reconnect the STYLISTIC Q7310 to its cradle, gently refit the tablet on it (red arrows). The guidance indicator (blue circle) on the
►
tablet and cradle will support you to find the correct position.
The cradle of the STYLISTIC Q7310 can be ordered as a module.
►
Return to Table of Contents
Page 7 of 64