Remote management
This page allows the user to manage the Remote Management feature applying
the changes in the sections here below:
• Remote Management – This function allows the terminal to be managed
remotely over the satellite connection.
— Add Management Address – This section allows the user to configure
a list of IP Addresses that can send remote commands. The user needs
to edit the IP Address and then click the Add Address button. The IP
address will appear in the Management Address table on the left.
— Management Addresses – This table shows the list of IP addresses
allowed to send remote commands. The user can remove an IP
address from the list selecting it from the list and then clicking the
Remove Address button.
Figure 18: Remote Management screen
Chapter 3 • Using the Web UI
H62751 Revision B
25