Displaying Udp Helper Information; Defining A Port And Ip Routing Address; Removing A Port Number And Ip Routing Address - 3Com CoreBuilder 2500 User Manual

10-16 C 10: A
HAPTER DMINISTERING
Displaying UDP
Helper Information
Top-Level Menu
system
ethernet interface
fddi
route
display
atm arp
define
bridge
atmArpServer
remove
ip multicast
hopCountLimit
udpHelper
ipx
threshold
appletalk
routing
interface
snmp icmpRouterDiscovery
analyzer ospf
script
rip
logout ping
statistics
Defining a Port and
IP Routing Address
Top-Level Menu
system
ethernet interface
fddi route
display
atm
arp
define
bridge atmArpServer
remove
multicast
ip
hopCountLimit
ipx udpHelper
threshold
appletalk routing
interface
snmp
icmpRouterDiscovery
analyzer ospf
script rip
logout
ping
statistics
Removing a
Port Number and
IP Routing Address
Top-Level Menu
system
ethernet
interface
fddi route
display
atm
arp
define
bridge atmArpServer
remove
multicast
ip
hopCountLimit
ipx udpHelper
threshold
appletalk routing
interface
snmp icmpRouterDiscovery
analyzer
ospf
script rip
logout ping
statistics
IP R
OUTING
You can display the hop and threshold configuration and list the ports
with their IP routing addresses that are defined for your system.
To display UDP Helper information, from the top level of the
Administration Console, enter:
ip udpHelper display
The following example shows a UDP Helper display:
BOOTP relay hop count limit is 4,BOOTP relay threshold is 0.
BOOTP is evenly distributing interfaces
UDP port
67
You can define port numbers and IP routing addresses for the UDP
Helper. You can have up to 32 combinations of port numbers and IP
routing addresses per router. You can also have multiple IP address entries
for the same ports.
To define port numbers and IP routing addresses:
1 From the top level of the Administration Console, enter:
ip udpHelper define
2 Enter the port numbers and IP routing addresses that you want to define.
To remove a port number and IP routing address that is defined for
UDP Helper:
1 From the top level of the Administration Console, enter:
ip udpHelper remove
2 Enter the UDP port number that you want to remove.
3 Enter the IP routing address that you want to remove.
The port numbers and IP routing addresses are immediately removed.
Forwarding address
158.101.1.112