Administering Memory Partitions; Displaying Memory Partitions; Modifying Memory Partitions - 3Com CoreBuilder 2500 User Manual

13-24 C 13: A
HAPTER DMINISTERING
Administering
Memory Partitions
Displaying Memory
Partitions
Top-Level Menu
system
interface
ethernet
route
areas
fddi
arp
display
defaultRouteMetric
atm
multicast
interface
modify
bridge
udphelper
linkStateData
ip
routing
neighbors
ipx
icmpRouterDiscovery
routerID
appletalk
ospf
partition
snmp
rip
stubDefaultMetric
analyzer
ping
virtualLinks
script
statistics
statistics
logout
Modifying Memory
Partitions
Top-Level Menu
system
interface
ethernet
route
areas
fddi
arp
display
defaultRouteMetric
atm
multicast
interface modify
bridge
udphelper
linkStateData
ip
routing
neighbors
ipx
icmpRouterDiscovery
routerID
appletalk
ospf
partition
snmp
rip
stubDefaultMetric
analyzer
ping
virtualLinks
script
statistics
statistics
logout
OSPF R
OUTING
You can specify how much memory the OSPF protocol can use for its data
processing and storage from the Administration Console.
You can display a module's OSPF memory allocation. From the top level of
the Administration Console, enter:
ip ospf partition display
This example shows an OSPF memory partition summary:
Current partition maximum size = 500000 (bytes).
Configured partition maximum size = 500000 (bytes).
Allocated partition size = 100000 (bytes).
This display shows three partition parameters:
Current partition maximum size (
The OSPF memory limit implemented at the last system reboot
Configured partition maximum size (
The last value that you entered, which becomes the current partition
maximum size at system reboot
Allocated partition size (
current working memory. OSPF dynamically allocates memory in
100,000-byte chunks up to the current partition maximum size.
If the system shows a partition size of
CoreBuilder 2500 system memory partition.
Use this command to change the OSPF memory allocation. This change
takes effect at system reboot. To modify a module's OSPF memory
allocation:
1 From the top level of the Administration Console, enter:
ip ospf partition modify
2 Enter the new partition size (in bytes).
Example:
Maximum partition size is 8443220 bytes
Enter new partition maximum size (in bytes) [500000]: 600000
New partition size will take effect after reboot.
The maximum partition size (
total memory is available to define as the OSPF maximum partition.
in this example) —
500000
500000
in this example) — The module's
100000
, the OSPF protocol is using the
0
in this example) shows how much
8443220
in this example) —