Defining An Ip Lis Interface - 3Com CoreBuilder 2500 User Manual

Defining an IP LIS
Interface
Top-Level Menu
system
ethernet
interface
display
fddi
route
atm define
arp
bridge
modify
atmArpServer
remove
ip
multicast
addPvc
ipx udpHelper
removePvc
appletalk routing
snmp
icmpRouterDiscovery
analyzer ospf
script
rip
logout
ping
statistics
Enter IP address: 158.101.1.1
Enter subnet mask [255.255.0.0]: 255.255.255.0
Enter interface type (vlan,lis) [lis]:
Enter ATM arp server address
[00-0000-00-000000-0000-0000-0000-000000000000-00]:47-0000-00-000000-
00000000-00cc -000000000001-ff
Accept completed ATM address (yes,no) [yes]:
Enter max. SVC count (0=no max.0) [0]:
Enter inactivity time (0=infinite, 10-10000) seconds [1200]:
Enter min. holding time (0-10000) seconds [60]:
Select ATM port [1]:
Enter PVC(s) (VPI/VCI)[]: 1/32,1/200,1/3330
When you define an IP LIS interface, you specify several general IP
interface characteristics and IP LIS characteristics.
Before you define an IP LIS interface with SVCs, be sure that you have
defined an ATM ARP server, as described in the section "Administering
ATM ARP Servers" later in this chapter. If the LIS interface has only PVCs,
you do not need to define an ATM ARP server.
To define an IP LIS interface:
1 From the top level of the Administration Console, enter:
ip interface define
2 You are prompted for the interface's parameters.
To accept the existing value in brackets, press Return at the prompt.
3 Enter the IP address of the interface.
4 Enter the subnet mask of the network to which you want to connect the
interface.
5 Enter the type of IP interface:
6 Enter the LIS information:
For a LIS interface with SVCs — Enter the ATM ARP server
address, the maximum SVC count, the inactivity timer, the
minimum holding time, and the ATM port associated with the
interface. Press Return to accept the existing values shown in
brackets.
For a LIS interface with only PVCs — Enter the ATM port and
the PVCs associated with the interface. You can enter up to 51
PVCs for each interface. (The maximum number of PVCs on the
CoreBuilder 2500 system is 64.)
LIS interface example with both PVCs and SVCs:
Administering Interfaces
lis
10-5