Seatalk ® Pilot Controller Connection - Raymarine EVOLUTION EV-1 Installation Instructions Manual

11.2 SeaTalk ® pilot controller connection
The SeaTalk ® to SeaTalkng ® converter can be used to enable control of SeaTalkng ® autopilots using
legacy SeaTalk ® pilot controllers. Other SeaTalk ® devices can be connected to the SeaTalkng ®
backbone in the same way.
1. SeaTalkng ® MFD (MFDs require a separate power supply.)
2. SeaTalk ® to SeaTalkng ® adaptor cable (A22164)
3. SeaTalk ® pilot controller (powered from the SeaTalkng ® backbone.)
4. SeaTalkng ® autopilot
5. SeaTalkng ® 12 V dc power supply connection
6. SeaTalk ® to SeaTalkng ® converter
ACU-200, ACU-300, ACU-400 connections
103