Drive (Motor) Connection - Acu-100, Acu-150 - Raymarine EVOLUTION EV-1 Installation Instructions Manual

Important:
Use of an incorrect power cable size will reduce the power supplied to the drive unit and could
cause your autopilot to malfunction. If in doubt, use a heavier gauge cable. Keep cable runs to a
minimum where possible, and also observe the guidance provided in the location requirements
section of this document.
Drive (motor) connection — ACU-100, ACU-150
Motor connection
The motor connects to the connection panel of the ACU.
Note:
The connection colors for the motor cables may be different depending on the motor type.
Motor power output
ACU-100
7 A (maximum continuous output)
ACU–100 / ACU–150 connections
ACU-150
12 A (maximum continuous output)
77