2. Select Basic Settings to set or change the user's PIN code.
3. Enter the current PIN code. The default PIN is 1234.
4. Enter your new 4 digit PIN code, and re-enter if required.
5. From the web interface only, select Save.
Related links
Configuring Advanced User Settings
Confirming Call Disconnections
About this task
To prevent accidental disconnection from a call, you can configure the system to confirm before a
call is disconnected. By default, calls are disconnected when a participant ends the call, without
requiring a confirmation.
Procedure
1. Access the call settings. From the Avaya XT Series web interface, select Basic Settings >
Call-Answer Mode > General. From the endpoint's main menu, select Configure >
Calling.
2. Set Confirm Disconnect to Yes.
3. From the web interface only, select Save.
Related links
Configuring Advanced User Settings
March 2021
Figure 48: Set PIN Code
on page 104
on page 104
User Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
Confirming Call Disconnections
113