Labeling Channels - Toshiba Regza 42XV545U Owner's Manual

52XV545U_EN.book Page 38 Monday, August 4, 2008 10:54 AM
2
Press B or b to highlight Enable Auto Input and
then press C or c to select On.
Auto Input
Use this menu to enable your TV's automatic input switching feature when
changing modes on your remote control.
POWER
SLEEP
TV
MODE SELECT
CABLE/SAT DVD VCR/PVR
Reset
3
Press B or b to select the mode field you want to set.
4
Press C or c to select the desired input source for
that mode.
5
Repeat steps 3 and 4 for other modes.
To save your settings, highlight Done and press T.
6
To turn off Auto Input:
Select Off in step 2.
Note: Setting the feature to Off will not cancel any settings;
however, all items will be grayed out.
To reset Auto Input:
Highlight Reset and press T.

Labeling channels

A list of common channel labels (logos) for various
channels (ABC, CBS, etc.) will be programmed into the
TV. You will be able to view and assign these logos from
the Channel Labeling window. If the desired channel
label is not provided in the list, you will be able to
manually enter/edit labels using the software keyboard.
To assign channel labels:
1
From the Preferences menu, highlight Channel
Labeling and press T.
The Channel Labeling window opens.
Press < or , to select the channel you want to label.
2
3
Press BbC c to highlight the desired channel label
and press T.
4
Repeat steps 2 and 3 for other channels.
To save your settings, highlight Done and press T.
5
The maximum number of labels that can be stored is
128.
To remove channel labels:
1
Open the Channel Labeling window.
38
Chapter 5: Setting up your TV
Enable Auto Input On
TV - -
CABLE/SAT ColorStream HD1
DVD HDMI 1
VCR/PVR Video 1
Done
Press < or , to select the channel for which you
2
want to remove the label.
Press BbC c to highlight No Label and press T.
3
4
Repeat steps 2 and 3 for other channels.
To save your settings, highlight Done and press T.
5
If the desired channel label is not available from the list
of presets, you can create a custom label.
To create and assign a custom label:
1
Open the Channel Labeling window.
Press < or , to select a channel you want to label.
2
Press Bb c to highlight Custom and press T.
3
The software keyboard will appear.
Edit CH RTN
1 1 2 A B C a b c 2
4 5
G H I g h i 4 J K L j k l 5
7 P Q R S p q r s 7 8 T U V t u v 8
_
0
Backspace 0
100
4
Repeatedly press the corresponding key on the
remote control to highlight the desired character on
the on-screen software keyboard.
5
The highlighted character is entered after you either
press a different key, press c key, or after a two-
second pause.
6
Repeat steps 4 and 5 until you have entered all
desired text.
When finished, press T.
7
8
New labels will be added to the list in alphabetical
order and marked with an icon
they are custom. Highlight the new custom label and
press T to assign.
Assigned channel labels will be displayed in the
banner, Channel Add/Delete, Channels Block, and
Channel Browser.
To delete the custom label:
1
Open the Channel Labeling window.
Highlight the label to be deleted and press =.
2
3
Highlight Yes from the deletion confirmation
window and press T.
Delete the selected custom label?
No
Highlight Done and press T to save changes, and
4
go back to the Channel Labeling window.
Cancel Send EXIT Exit
3 D E F d e f 3
6
M N O m n o 6
9 W X Y Z w x y z 9
INPUT Space
to indicate that
Yes
XV545U (E/F) Web 177.8:228.6