Switching Between Two Channels Using Channel; Return; Switching Between Two Channels Using Surflock; Selecting The Picture Size - Toshiba Regza 42XV545U Owner's Manual

52XV545U_EN.book Page 46 Monday, August 4, 2008 10:54 AM
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch
between two channels without entering an actual
channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (=) button if needed).
Press R on the remote control. The previous
3
channel will display. Each time you press R, the
TV will switch back and forth between the last two
channels that were tuned.
R
Note: If you press
will return to the last-viewed input.
Switching between two channels using
SurfLock ™
The SurfLock ™ feature temporarily "memorizes" one
channel to the R button, so you can return to that
channel quickly from any other channel by pressing R.
To memorize a channel to the R button:
1
Tune the TV to the channel you want to program
into the R button.
Press and hold R for about 2 seconds until the
2
message "Memorized" appears on-screen. The
channel has been programmed to the R button.
3
You can then change channels repeatedly, and when
you press R, the memorized channel will be tuned.
The TV will return to the memorized channel one time
only. Once you press R and then change channels
again, the CH RTN memory will be cleared and the
button will function as Channel Return, by switching
back and forth between the last two channels that are
tuned.This feature also works for external inputs.
46
Chapter 6: Using the TV's features
from a non-antenna input, the TV

Selecting the picture size

You can view many program formats in a variety of
picture sizes—Natural, TheaterWide 1, TheaterWide 2,
TheaterWide 3, Full, 4:3 HD, Native and Dot by Dot.
Note: The "picture size" illustrations are examples only. The
format of the image (in any of the picture sizes) will vary
depending on the format of the signal you are currently
watching. Select the picture size that displays the current
program the way that looks best to you.
You can save separate picture size preferences for each
input on your TV.
To select the picture size using the remote control:
Press I on the remote control.
1
2
While the Picture Size screen is open, you can do
one of the following to select the desired picture size:
Repeatedly press I.
•
Press the corresponding Number button (0–6)
•
while the Picture Size screen is open.
Press B or b while the Picture Size screen is
•
open.
To select the picture size using the menus:
1
From the Video menu, highlight Theater Settings
and press T.
2
Highlight Picture Size and press C or c to select the
desired picture size setting.
Highlight Done and press T.
3
Note: Some of the picture sizes may not be available
depending on the receiving signal format.
Using these functions to change the picture size (i.e.,
changing the height/ width ratio) for any purpose other than
your private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
Note: If you select one of the TheaterWide
top and bottom edges of the picture (including subtitles or
captions) may be hidden. To view the hidden edges, either
scroll the picture (TheaterWide 2 and 3 only) or try viewing the
program in Full or Natural picture size.
®
picture sizes, the
XV545U (E/F) Web 177.8:228.6