Using The X.v.color Selection Feature; Using The Game Mode Feature - Toshiba Regza 42XV545U Owner's Manual

52XV545U_EN.book Page 67 Monday, August 4, 2008 10:54 AM
Using Color Palette Adjustment
When color palette adjustment is selected, the list of base
colors will be displayed. You can select a base color to
adjust.
Note: To use Color Palette Adjustment, ColorMaster must
be set to On.
To adjust the Base Colors:
1
From the ColorMaster menu, highlight Color
Palette Adjustment and press T.
2
The Select Standard Color window will be
displayed.
Press B or b to highlight the color you want to
adjust, and then press T.
3
The Color Adjustment window will be displayed.
Press B to freeze the picture.
To return to moving picture, press B again.
Color Adjustment
Red
Hue
-
Saturation
-
Brightness
-
Reset
4
Press B or b to select either Hue, Saturation, or
Brightness, and then press C and c to adjust the
setting.
Note: To revert to the factory settings of the Hue,
Saturation, and Brightness for the selected color,
Highlight Reset and press T.
Press R to return to the previous menu.
5
6
Repeat steps 2 through 5 to adjust any other color.
To reset ColorMaster to its factory settings:
1
From the ColorMaster menu, highlight Reset, and
then press T.
2
A confirmation message will appear. Highlight OK,
and then press T.
Press O.
3
Chapter 7: Using the TV's advanced features

Using the x.v.Color Selection feature

The color range "x.v.Color" is an international standard
that enables a wider color range than conventional video
applications.
When set to Auto, picture settings are automatically set
when an x.v.Color signal is detected.
When set to On, x.v.Color detection does not occur, so
picture settings are always adjusted for x.v.Color.
When set to Off, normal processing occurs.
Note: If a non-HDMI input is selected or the x.v.Color setting
in the HDMI Settings menu is set to Off, this feature will appear
grayed out in the Video menu.
To change the x.v.Color Selection:
Press Y and open the Video menu.
1
2
Press B or b to highlight x.v.Color Selection and
press c. Press B or b to select the settings you prefer
(Auto, On, or Off) and press T.
"x.v.Color" and the "x.v.Color" logo are trademarks of Sony
Corporation.
0
+

Using the Game Mode feature

0
+
You can use the Game Mode feature for shorter frame
0
+
delays when playing a video game requiring split-
second timing between the on-screen display and input
from the controller (such as music creation and high-
action games).
This feature is more effective for 480i and 1080i input
signals.
Note: To use the Game Mode feature, the current video input
must be Video 1, Video 2, ColorStream HD1,
ColorStream HD2, HDMI 1, HDMI 2, HDMI 3, HDMI 4, or PC.
The Game Mode cannot be turned on when the ANT/CABLE
input is selected.
To turn on Game Mode:
1
From the Video menu, press B or b to highlight the
Game Mode field, press c and B b to select On, and
press T.
To turn off Game Mode:
Select Off in step 1 above, change the video input, or turn
the TV off and then on again.
Note: You can change the video input by pressing + on the
remote control (- page 42).
67
XV545U (E/F) Web 177.8:228.6