Labeling Channels - Toshiba 22AV60U Owner's Manual

To manually add digital subchannels on a physical
channel:
Use the Channel Numbers and the Dash ((N)) on the remote
control to enter the channel number (for example, 56-1).
If the channel is found, the number will be added to the list
and the box will be checked.
If the channel is not found, a message will appear.
To remove a channel from the channel memory:
Highlight the checked box next to the channel number you
want to remove, and then press @ to uncheck the box.
To save your new settings:
Highlight Done and press @.
To revert to your original settings:
Highlight Cancel and press @ before saving.
To remove all channels from the channel memory:
Highlight Reset and press @, and then highlight Done and
press @.
Note: A video preview of the currently highlighted channel is
provided to assist you in adding/deleting channels.
To remove encrypted channels from the channel
memory:
If an encrypted channel is accidentally added to the channel
list by programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel
surfing. When you tune into an encrypted channel, the
following message will appear.
Press (JD while the message is on the screen to remove the
unnecessary channel from the channel list.
Labeling channels
A list of common channel labels (loges) for various channels
(ABC, CBS, etc.) will be progrannned into the TV. You will
be able to view and assign these loges from the
Channel
Labeling window. If the desired channel label is not provided
in the list, you wilt be able to manually enter/edit labels using
the software keyboard.
To assign channel labels:
1
Press M_uand open the Preferences menu.
2 Highlight
Channel L abeling
and press @.
The Channel Labeling
window opens.
3 Press (_/or _J to select the channel you want to label.
4 Press AY'_ to highlight the desired channel label and
press @.
5 Repeat steps 3 and 4 for other channels.
6
To save your settings, highlight Done and press @.
_ AN!MAL
The nmximum number of labels that can be stored is 128.
To remove channel labels:
1
Openthe Channel Labeling window.
2 Press _,] or _ to select the channel for which you want
to remove the label.
3
Press AY'_
to highlight NOLabel and press @.
4 Repeat steps 2 and 3 for other channels.
To save your settings, highlight Done and press @.
If the desired channel label is not available from the list of
presets, you can create a custom label.
(continued)
25