Connecting A Digital Audio System; Connecting An Audio System - Toshiba Regza 42XV545U Owner's Manual

52XV545U_EN.book Page 18 Monday, August 4, 2008 10:54 AM

Connecting a digital audio system

The TV's DIGITAL AUDIO OUT terminal outputs a
®
Dolby * Digital or 2-channel down-mixed PCM
(pulse-code modulation) signal for use with an external
Dolby ® Digital decoder or other external audio system
with optical audio input.
You will need:
optical audio cable (Use an optical audio cable that has
•
the larger "TosLink" connector and not the smaller
"mini-optical" connector.)
Dolby Digital decoder or
other digital audio system
Optical
LINE IN
Audio IN
L R
TV upper back panel
To control the audio:
1
Turn on the TV and the digital audio device.
Press Y on the TV's remote control and open the
2
Audio menu.
Highlight Audio Setup and press T.
3
Audio
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio Setup
4
In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device
( - "Selecting the optical audio output format" on
page 53).
Audio Setup
PC Audio
HDMI 1 Audio
MTS
Language
Optical Output Format
Dolby Digital
Dynamic Range Control
Reset
18
Chapter 2: Connecting your TV
Note:
• Some audio systems may not be compatible with Dolby
• The DIGITAL AUDIO OUT terminal may not output some
• The Dolby Digital format is only available when tuned to a
* Manufactured under license from Dolby Laboratories.

Connecting an audio system

This connection allows you to use external speakers with
an external analog audio amplifier to adjust the sound
level.
You will need:
•
TV upper back panel
To control the audio:
1
2
No
Auto
Stereo
English
Dolby Digital
Compressed
Done
Digital bitstream signals. Older audio systems that are not
compatible with standard optical out signals may not work
properly, creating a high noise level that may damage
speakers or headphones. THIS DAMAGE IS NOT COVERED
BY YOUR WARRANTY.
digital audio sources because of copy restrictions.
digital RF channel.
Dolby, and the double-D symbol are trademarks of Dolby
Laboratories.
standard audio cables
Analog audio amplifier
LINE IN
L R
Turn on the TV and the stereo amplifier.
Minimize the sound volume from the TV's built-in
speakers and control the volume level using the
amplifier's remote control.
XV545U (E/F) Web 177.8:228.6