Labeling Channels - Toshiba 40RV52R Owner's Manual

The maximum number of labels that can be stored is 128.
Labeling channels
A list of common channel labels (logos) for various channels
(ABC, CBS, etc.) will be programmed into the TV. You will
be able to view and assign these logos from the
Channel
labeling
window. If the desired channel label is not provided
in the list, you will be able to manually enter/edit labels using
the software keyboard.
To assign channel labels:
1 Press M~U and open the
Preferences
menu.
2
Highlight
Channel labeling
and press
8.
The
Channel labeling
window opens.
3
Press
(£)
or
l:iJ
to select the channel you want to label.
4
Press ...
T ....
~ to highlight the desired channel label and
press
8.
5
Repeat steps 3 and 4 for other channels.
6
To save your settings, highlight
Done
and press
8.
P.-.ss CH UPIDOWN 10
t:hIIngec:hlMels.
I
Custom
Clear All
-
... (No label}
A&E
ABC
ABCFAM
ABCHD
AMAX
AMAXW
AMe
ANIMAL
Channel Labeling
To remove channel labels:
1
Open the
Channel labeling
window.
I 2
Press
(£)
or
l:iJ
to select the channel for which you want
to remove the label.
3
Press ...
T .... ~
to highlight
No label
and press
8.
4
Repeat steps 2 and 3 for other channels.
5
To save your settings, highlight
Done
and press
8.
If the desired channel label is not available from the list of
presets, you can create a custom label.
Press "0)" button while the message is on the screen to
remove the unnecessary channel from the channel list.
To remove encrypted channels from the channel
memory:
If an encrypted channel is accidentally added to the channel
list by programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel
surfing. When you tunes to an encrypted channel, the
following message will appear.
To revert to your original settings:
Highlight
Cancel
and press
8
before saving.
Digital Channel Is Encrypted - Press 1 on remote to remove channel
To remove all channels from the channel memory:
Highlight
Reset
and press
8,
and then highlight
Done
and
press
8.
Note: A video preview of the currently highlighted channel is
provided to assist you in adding/deleting channels.
To remove a channel from the channel memory:
Highlight the checked box next to the channel number you
want to remove, and then press
8
to uncheck the box.
To save your new settings:
Highlight
Done
and press
8.
To manually add digital subchannels on a physical
channel:
Use the Channel Numbers and the Dash
(@Q))
on the remote
control to enter the channel number (for example, 56-I).
If the channel is found, the number will be added to the list
and the box will be checked.
If the channel is not found, a message will appear.
(continued)