Adjusting The Audio; Muting The Sound; Using The Digital Audio Selector; Selecting Stereo/Sap Broadcasts - Toshiba Regza 42XV545U Owner's Manual

52XV545U_EN.book Page 52 Monday, August 4, 2008 10:54 AM

Adjusting the audio

Muting the sound

Press W on the remote control to partially reduce (1/2
MUTE) or turn off (MUTE) the sound. Each time you
press W, the mute mode will change in the following
order:
1/2 Mute Mute
If the closed caption mode is set to Off when you select
"MUTE" mode, the closed caption feature is
automatically activated if the TV program is Closed
Captioned. To mute the audio without automatically
activating the closed caption feature, use Z to set the
volume to 0. See "Using the closed caption mode" (-
page 50) for more information on closed caption modes.

Using the digital audio selector

You can use the Digital Audio Selector to conveniently
switch between audio tracks on a digital channel (for
those channels that have multiple audio tracks). This
temporarily overrides the audio track chosen by the
language option under Audio Setup (- "Selecting
stereo/SAP broadcasts" on page 52).
To use the digital audio selector:
Press Y and open the Audio menu.
1
Highlight Digital Audio Selector and press T.
2
Audio
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio Setup
3
Press B or b to select Audio, and then press C or c
to select the desired service.
Press O.
4
52
Chapter 6: Using the TV's features

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit
a second audio program (SAP) containing a second
language, music, or other audio information (when
provided by individual stations).
When the TV receives a stereo or SAP broadcast, the
word "STEREO" or "SAP" appears on-screen when E
is pressed. The MTS feature is only available for analog
signals on the ANT/CABLE input (- page 61).
Volume
To listen to stereo sound:
1
2
3
To listen to an alternate language on an ATSC
digital station (if available):
Highlight the Language field in step 2 above, and then
press C or c to select the language you prefer.
To listen to a second audio program on an analog
station (if available):
Select SAP in step 2.
Note:
• A second audio program (SAP) can be heard only on those
• If you have SAP on and the station you are watching is not
From the Audio menu, highlight Audio Setup and
press T.
In the MTS field, select Stereo.
To save the new settings, highlight Done and press
T.
To reset the settings to the factory defaults, highlight
Reset and press T.
Note:
• You can typically leave the TV in Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to reduce the
noise.
TV stations that offer it. For example, a station might
broadcast another language as a second audio program. If
you have SAP on, you will see the current program on the
screen but hear the other language instead of the program's
normal audio.
broadcasting a second audio program, the station's normal
audio will be output. However, occasionally there is no
sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.
XV545U (E/F) Web 177.8:228.6