Labeling Channels - Toshiba 40G30U Owner's Manual

3 Press S or T to select a channel position to be
skipped and press . A tick will appear in the
box.To remove the tick, press
To add a channel to the channel memory:
Highlight the checked box next to the channel number
you want to add, and then press
To manually add digital subchannels on a
physical channel:
Use the Channel Numbers and the Dash (
the remote control to enter the channel number (for
example, 56–1).
If the channel is found, the number will be added to
the list and the box will be unchecked.
If the channel is not found, a message will appear.
Note: Skipped channels cannot be selected with
or ; however, they can still be accessed
using the number keys on the remote control.

Labeling channels

A list of common channel labels (logos) for various
channels (ABC, CBS, etc.) will be programmed into
the TV. You will be able to view and assign these
logos from the Channel Labeling window. If the
desired channel label is not provided in the list, you
will be able to manually enter/edit labels using the
software keyboard.
To assign channel labels:
1
and open the Preferences menu.
Press
2
Highlight Channel Labeling and press
The Channel Labeling window opens.
3
Press or to select the channel you want to
label.
4 Press STWX to highlight the desired channel
label and press .
5
Repeat steps 3 and 4 for other channels.
6
To save your settings, highlight Done and press
32
Chapter 5: Setting up your TV
To remove channel labels:
again.
1
2
to remove the tick.
3
4
5
) on
If the desired channel label is not available from the
list of presets, you can create a custom label.
To create and assign a custom label:
1
2
3
4
5
.
6
7
8
.
To delete the custom label:
1
2
3
The maximum number of labels that can be
stored is 128.
Open the Channel Labeling window.
Press or to select the channel for which
you want to remove the label.
Press STWX to highlight No Label and press
Repeat steps 2 and 3 for other channels.
To save your settings, highlight Done and press
Open the Channel Labeling window.
Press or to select a channel you want to
label.
Press STX to highlight Custom and press
The software keyboard will appear.
Repeatedly press the corresponding key on the
remote control to highlight the desired character
on the on-screen software keyboard.
The highlighted character is entered after you
either press a different key, press X key, or after a
two-second pause.
Repeat steps 4 and 5 until you have entered all
desired text.
When finished, press .
New labels will be added to the list in alphabetical
order and marked with an icon
they are custom. Highlight the new custom label
and press to assign.
Assigned channel labels will be displayed in the
banner, Channel Options, and Channel Browser
Open the Channel Labeling window.
Highlight the label to be deleted and press
Highlight Yes from the deletion confirmation
window and press .
.
.
.
to indicate that
TM
.
.
(continued)