Connecting A Digital Audio System; Connecting An Audio System - Toshiba 40RV52R Owner's Manual

Connecting a digital audio system
o
o
o
o
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
To control the audio:
1
Turn on the TV and the stereo amplifier.
2
Set up a optimum volume level of the stereo amplifier.
Then you can adjust the sound volume level from the TV's
volume control or the amplifier's volume control.
3
Menu item of Speakers can turn to OFF to mute the TV's
built in speakers.
You will need:
• standard audio cables
Analog audio amplifier
damage speakers or headphones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTY
• The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
" Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Connecting an audio system
o
o
TV back panel
o
o
Audio -.
Digital Audio Selector
Audio Settings
Advanced Audio Settings
4
In the
Optical Output Format field, select either Dolby
Digital
or
PCM, depending on your device (I&"Selecting
the optical audio output format" on page 43).
To control the audio:
You will need:
• optical audio cable (Use an optical audio cable that has
the larger "TosLink" connector and not the smaller "mini-
optical" connector.)
1
Turn on the TV and the digital audio device.
2
Press
M~U
on the TV's remote control and open the
Audio
menu.
3
Highlight
Audio Setup and press
@.
The TV's
DIGITAL AUDIO OUT terminal outputs a Dolby®*
Digital
~_Do~~~
or 2-channel down-mixed peM (pulse-code
modulation) signal for use with an external Dolby® Digital
decoder or other external audio system with optical audio
input.
Audio Setup
PC Audio
HDMl1 Audio
MTS
Language
No
Auto
Stereo
English
Audio
Digital Audio Selector
Advanced Audio Settings
Audio Setup
Reset
Done
Audio Settings
Bass
Treble
Balance
10 ......
0
10 •
0
o • -0
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may
not work properly; creating
a
high noise level that may
Reset Done