Connecting A Digital Audio System; Connecting An Audio System - Toshiba 26AV52U Owner's Manual

Chapter 2: CDnnecting YDur TV
Connecting a digital audio system
The TV's
DIGITAL AUDIO OUT
terminal outputs a Dolby®*
Digital
WD,~~~~,
or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby® Digital
decoder or other external audio system with optical audio
input.
You will need:
• optical audio cable (Use an optical audio cable that has
the larger "TosLink" connector and not the smaller "mini-
optical" connector.)
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may
not work properly, creating
a
high noise level that may
damage speakers or headphones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTY
• The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
*
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Connecting an audio system
This connection aUows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
1
Turn on the TV and the stereo amplifier.
2
Set up a optimum volume level of the stereo amplifier.
Then you can adjust the sound volume level from the TV's
volume control or the amplifier's volume control.
3
Menu item of Speakers can turn to OFF to mute the TV's
built in speakers.
o
o
Analog audio amplifier
TV back panel
o
o
To control the audio:
You will need:
• standard audio cables
Dolby Digital decoder or
0
other digital audio system
0
0
I
LINE IN
II
Opl~1
0
L
R Audio IN
~ ~
[Ql.
'-eEl
TV back panel
JJl
~ ~
--0 'ii
eEl
4
In the
Optical Output Format
field, select either
Dolby
Digital
or
PCM,
depending on your device (I&"Selecting
the optical audio output format" on page 44).
Audio
Digital Audio Selector
Audio Settings
To control the audio:
1
Turn on the TV and the digital audio device.
2
Press
M~U
on the TV's remote control and open the
Audio
menu.
3
Highlight
Audio Setup
and press
e.
Audio Setup
Audio
Digital Audio Selector
.
.
o
o
o
10
10·
o
Bass
Treble
Balance
Audio Settings
No
Auto
Stereo
English
Compressed
Done Reset
PC Audio
HDMI1 Audio
MTS
Language
Opue.1
O~ Form"
Dolby Digital
Dynamic Range Control
Audio Setup
Reset Done
I
18