Connecting A Digital Audio System; Connecting An Audio System - Toshiba Regza 40XV645U Owner's Manual

Connecting an audio system
*
Manufactured under license from Dolby Laboratories.
Dolby, and the double-D symbol are trademarks of Dolby
Laboratories.
This connection allows you to use external speakers
with an external analog audio amplifier to adjust the
sound level.
o
o
Analog audio amplifier
o
o
You will need:
• standard audio cables
damage speakers or headphones. THIS DAMAGE IS
NOT COVERED BY YOUR WARRANTY.
• The DIGITAL AUDIO OUT terminal may not output
some digital audio sources because of copy
restrictions.
• The Dolby Digital format is only available when tuned to
a
digital RF channel.
To control the audio:
1
Turn on the TV and the stereo amplifier.
2
Minimize the sound volume from the TV's built-in
speakers and control the volume level using the
amplifier's remote control.
Dolby Digital decoder or
0
other digital audio system
0
0
[r~[j~
0
L R AudiO IN
@@
[Ql~-=
•<Fl
111111
n::::-.
TV upper back panel
~
<F"[]DD:
4
Press .... or T to select Digital Audio Output, and
then press
~
or
~
to select either Auto or PCM
(Il:§
"Selecting the optical audio output format" on
page 43).
To control the audio:
1
Turn on the TV and the digital audio device.
2
Press
MOU
on the remote control to open the SETUP
menu.
3
Press .... or T to select AV Connection and press@.
The TV's DIGITAL AUDIO OUT terminal outputs a
Dolby®*
DigitallIlDo~~T~.v.
or 2-channel down-mixed PCM
(pulse-code modulation) signal for use with an external
Dolby® Digital decoder or other external audio system
with optical audio input.
You will need:
• optical audio cable (Use an optical audio cable that has
the larger "TosLink" connector and not the smaller
"mini-optical" connector.)
Connecting a digital audio system
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may
not work properly, creating
a
high noise level that may
17