Storage - Toro Workman Topdresser 1800 Operator's Manual

Storage

1. Thoroughly clean the machine, especially inside
the hopper. The hopper and conveyor belt area
should be free of any remaining sand particles.
2. Tighten all fasteners.
3. Lubricate all grease fittings and bearings. Wipe
off any excess lubricant.
4. The unit should be stored out of the sun to
prolong the life of the conveyor belt. When
stored outside it is recommended to cover the
hopper with a tarp.
5. Check the tension of the drive chain. Adjust the
tension, if necessary.
6. Check the tension of the conveyor belt. Adjust
the tension, if necessary.
7. When bringing the machine out of storage,
check for smooth operation of belt before adding
material into the hopper.
25