Table of Contents
Advertisement
Specifications
Note:
Specifications and design are subject to
change without notice.
Dimensions and Weights
Length
137 cm (54 inches)
Width
185 cm (73 inches)
Spreading width
152 cm (60 inches)
Inside clear width
175 cm (69 inches)
Height, mounted on
126 cm (49.5 inches)
Workman vehicle
Shipping weight
386 kg (850 pounds)
Dry weight
367 kg (808 pounds)
Hopper capacity
0.5 cubic meters (18 cu ft)
Required Attachments
Remote Hydraulic Control Kit (For
vehicles with serial numbers prior
to 239999999)
Engine Cover Kit (Mitsubishi,
liquid-cooled diesel Workman)
or
Engine Cover Kit (Mitsubishi,
liquid-cooled gas Workman)
or
Engine Cover Kit (Daihatsu,
liquid-cooled gas and diesel
Workman)
and
1/3 Area Cover (Daihatsu,
liquid-cooled gas and diesel
Workman)
Note:
The 1/3 cover will not fit
if a High Air Intake Kit is installed.
A 1/3 Flat Bed must be used if a
High Air Intake Kit is installed.
or
1/3 Flat Bed
Model No. 07415
Part No. 92-5963
Part No. 99-1214
Part No. 117-4867
(Included on HD series
models)
Part No. 93-9225
Model No. 07341
Recommended Accessories
Jack Stand Assembly (Qty. 4)
Requires: Hitch Pin (Qty. 4)
Tachometer/Speedometer Kit
(Mitsubishi, liquid-cooled gas
Workman)
Tachometer/Speedometer Kit
(Mitsubishi, liquid-cooled diesel
Workman)
Tachometer/Speedometer
Kit (air-cooled gas Workman
3000–4000)
Tachometer/Speedometer Kit
(air-cooled gas Workman HD)
Tachometer/Speedometer Kit
(Daihatsu, liquid-cooled gas
Workman 3000–4000)
Tachometer/Speedometer Kit
(Daihatsu, liquid-cooled diesel
Workman 3000–4000)
Tachometer Kit (air-cooled gas
Workman 3000–4000)
Tachometer Kit (Daihatsu,
liquid-cooled gas Workman
3000–4000)
Tachometer Kit (Daihatsu,
liquid-cooled diesel Workman
3000–4000)
Hand Throttle Kit (for vehicles with
serial numbers 240000001 and
up)
Hand Throttle Kit (for vehicles
with serial numbers prior to
239999999)
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
14
Part No. 105-9482-03
Part No. 100-4523
Part No. 87-9950
Part No. 87-9970
Part No. 87-9960
Part No. 115-7786
Part No. 105-9498
Part No. 105-9499
Part No. 107-7977
Part No. 107-7975
Part No. 107-7976
Model 07420
Model 07416
Advertisement
Table of Contents
