Table of Contents
Advertisement
Figure 12
1. Bed support
3.
Push the bed support onto the cylinder rod, and
ensure that the support end tabs rest on the
end of the cylinder barrel and cylinder-rod end
(Figure
13).
Figure 13
1. Bed support
2. Cylinder barrel
4.
When you are finished, remove the bed support
from the cylinder, and insert it into the brackets
on the back of the ROPS panel.
Important:
Do not try to lower the bed with
the bed support on the cylinder.
g026142
g009164
3. Bed
5
Connecting the Hydraulic
Couplers
No Parts Required
Procedure
1.
On vehicles with serial numbers prior to
239999999, move the remote hydraulic valve
handle
(Figure
vehicles with serial numbers 240000001 and up,
move the hydraulic lift lever
and forth to remove the system pressure and
ease the disconnection of the quick couplers.
1. Hydraulic valve handle
1. Hydraulic lift lever
2.
On vehicles with serial numbers 240000001 and
up, disconnect the 2 lift cylinder hoses from the
hoses secured to the coupler bracket
16). Insert the caps into the cylinder hose quick
couplers.
11
14) to the float position and on
(Figure
15) back
Figure 14
Figure 15
2. Hydraulic lift lock
g011386
g011390
(Figure
Advertisement
Table of Contents
