Turning The Power On And Off - Sharp DX-2500N Operation Manual

Hide thumbs Also See for DX-2500N:
Table of Contents

Advertisement

TURNING THE POWER ON AND OFF

The machine has two power switches. The main power switch is at the lower left after the front cover is opened. The
other power switch is the [POWER] key (
Main power switch
When the main power switch is switched on, the main
power indicator on the operation panel lights up.
"On" position
"Off" position
Turning on the power
(1) Switch the main power switch to the "on"
position.
(2) Press the [POWER] key (
power.
• If the main power indicator is blinking, press the [POWER] key (
• When turning off the main power switch, ensure that each of the lamps on the operation panel has been turned off.
• In the event that the main power is suddenly interrupted due to a power failure or other reason, turn the machine power
back on and then turn it off in the correct order. If the machine is left for a long time with the main power having been
turned off prior to the [POWER] key (
Switching off the main power switch or removing the power cord from the outlet while any of the indicators are lit or blinking
may damage the hard drive and cause data to be lost.
• Switch off both the [POWER] key (
failure, if there is a bad thunderstorm nearby, or when you are moving the machine.
When using the fax or Internet fax function, always keep the main power switch in the "on" position.
Restarting the machine
In order for some settings to take effect, the machine must be restarted.
If a message in the touch panel prompts you to restart the machine, press the [POWER] key (
and then press the key again to turn the power back on.
In some states of the machine, pressing the [POWER] key (
use the main power switch to switch the power off and then on.
) on the operation panel at the top right.
) to turn on the
), abnormal noises, degraded image quality, and other problems may result.
) and the main power switch and unplug the power cord if you suspect a machine
1-15
BEFORE USING THE MACHINE
[POWER] key
Main power indicator
Turning off the power
(1) Press the [POWER] key (
power.
(2) Switch the main power switch to the "off"
position.
) after it becomes steadily lit.
) to restart will not make the settings take effect. In this case,
[POWER] key
) to turn off the
) to turn off the power
Contents

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents