Turning On The Power - Sharp MX-M1056 Quick Start Manual

TURNING ON THE POWER

This section describes how to turn on/off the machine's power and how to restart the machine.
Operate two power switches: the main power switch inside the front cover, located in the lower left corner, and the
[Power] button on the operation panel.

Turning on the power

• Turn the main power switch to the "
• When the main power indicator lights in green, press the [Power] button.
Turning off the power
Press the [Power] to turn off the power.
To turn off the power for an extended time, press the [Power] button to turn off the power, and switch the main power
switch to the " " position after the operation panel screen disappears.
Restart the machine
Turn off the power by pressing the [Power] button and then press it again to turn on the power.
• When turning off the main power switch, press the [Power] button on the operation panel and then turn the main power
switch to the " " position.
In a sudden case of main power outage, turn the power for the machine back on and then turn it off in the correct order.
If the machine is left for a long time with the main power having been turned off prior to the [Power] button being turned off,
abnormal noises, degraded image quality or other problems may result.
• Turn off both the [Power] button and the main power switch and unplug the power cord if you suspect a machine failure, if
there is a bad thunderstorm nearby, or when you are moving the machine.
In order for some settings to take effect, the machine must be restarted. In some states of the machine, restarting with the
[Power] button may not make the settings take effect. In this case, turn off the main power switch and then turn it on again.
BEFORE USING THE MACHINE
" position.
[Power] button
Main power indicator
The main power switch
13