Setting A Shared Folder As A Save Location - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Setting a Shared Folder as a Save Location

The feature of scanning to shared folders is also called "Scan to SMB" because the feature uses Server Message Block (SMB), a
Windows-specific technology. SMB is a protocol for sharing resources, such as files and printers, with more than one device in a network
( Configuring SMB ). To configure the machine for saving your scanned documents into a shared folder in the network via SMB,
specify the location of the shared folder from a computer by using the Send Function Setting Tool.
You can also use the Remote UI to specify the location of the shared folder by registering the folder to the Address Book. The
Send Function Setting Tool is helpful for users who want to complete the setup easily.
1
Start the Send Function Setting Tool.
Using a Web browser
Enter "http://(the IP address of the machine)/sendsupport_login.html" in the address field of a Web browser, and press the
[ENTER] key.
Using the provided DVD-ROM
1
Insert the provided DVD-ROM into the drive on the computer.
Select a language and click [OK] if you are prompted to do so.
2
Click [Start Software Programs].
If the above screen is not displayed, see
If [AutoPlay] is displayed, click [Run MInst.exe].
3
Click [Start] for [Send Function Setting Tool].
4
Click [Next].
If you want to view Send Setting Guide, click [How to Set].
Displaying the [Software Programs/Manuals Setup] Screen.
0SCJ-07Y