Specifying Previously Used Destinations (Fax) - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Specifying Previously Used Destinations (Fax)

You can select a destination from among the past three destinations. When you specify a previously used
destination, the machine also sets the same fax settings such as density you used the last time you sent
documents to that destination.
When <Restrict Resending from Log> is set to <On>, you cannot use this feature.
Destinations
Turning OFF the machine or setting <Restrict New Destinations> to <On> deletes the past destinations, and disables this
feature. Limiting Available Destinations
The destinations in Manual Sending are not available for this feature.
Sending)
When you specify a destination using this feature, any destinations that you have already specified are deleted.
1
Press and tap <Fax>.
When the logon screen appears, use the numeric keys to enter the user name and password. Then select the authentication
server and press
2
Select <Destination>
3
Select a destination.
If you are using a sequential broadcast log, only the address specified for the first transmission is displayed, but all the
destinations are specified.
The selected destination and the fax settings used at the time are specified. You can also change the settings before sending.
To delete destinations
If you used a sequential broadcast log, you can delete destinations as necessary.
1
Tap <Destination>
. Logging on to Authorized Send
<Recall Set.>.
Sending Faxes to Multiple Destinations Simultaneously (Sequential Broadcast)
.
<Confirm/Edit>.
Disabling Use of Previously Used
Making a Call before Sending Faxes (Manual
0SCJ-02S