Ldap Server Authentication - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

LDAP Server Authentication

If your system has an LDAP server installed, you can ensure that LDAP server authentication is carried out when the send function is
used. This enables you to prevent unauthorized use by third parties and information disclosure. Once the authorization settings are
enabled, the Authorized Send screen appears when the fax or scan function is used and operation can only continue if it is correctly
authorized by the LDAP server. Use the settings described here to configure LDAP server authentication. For more information on
registering the server to be used for authentication, see
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
3
Click [Security Settings]
4
Click [Edit].
5
Select the [Display Authentication Screen When Sending Operation Starts] check box and select whether a
confirmation screen is displayed at logout.
Registering LDAP Servers .
[Authentication Settings for Send Function].
Starting Remote UI
0SCJ-09R