Setting Ipv4 Address - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Setting IPv4 Address

The machine's IPv4 address can be either assigned automatically by a dynamic IP addressing protocol, such as
DHCP, or entered manually. When connecting the machine to a wired LAN, make sure that the connectors of
the LAN cable are firmly inserted into the ports (
connection if necessary.
Setting IPv4 Address
Testing the Network Connection
Setting IPv4 Address
1
Tap <Menu> in the <Home> Screen.
2
Tap <Network Settings>.
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press
Machine
3
Select <TCP/IP Settings>
4
Configure IP address settings.
<Auto Acquire>
Select to automatically assign an IP address via DHCP protocol. When <Auto Acquire: On> is displayed, automatic addressing is
enabled.
<Manually Acquire>
Select to configure the IP address settings by manually entering an IP address. In order to select this option, <Auto Acquire>
must be set to <Off>.
<Check Settings>
Select when you want to view the current IP address settings.
Automatically assigning an IP address
1
Select <Auto Acquire>
2
Tap <DHCP>.
If you do not want to use DHCP/BOOTP/RARP to assign an IP address
Tap <Off>. If you tap <DHCP> when these services are unavailable, the machine will waste time and communications
resources searching the network for these services.
Check that <Auto IP> is set to <On>.
<IPv4 Settings> <IP Address Settings>.
<Select Protocol>.
Connecting to a Wired LAN). You can test the network
0SCJ-07C
. Logging on to the