Certificates And Approvals; Sensorflash; Ped - Siemens SITRANS F Series Operating Instructions Manual

11.6

Certificates and approvals

Specification
Flameproof and Intrinsic Safety
FCS300 and FC310
(can be installed in Zone 1 for
gas)
Hygienic version
Pressure equipment
11.7

SensorFlash

Table 11-14 SensorFlash
Description
Capacity
File system support
Temperature range
Operation:
Storage:
11.8

PED

The pressure equipment directive 2014/68/EU applies to the alignment of the statutory orders
of the European member states for pressure equipment. Such equipment in the sense of the
directive includes vessels, pipelines and accessories with a maximum allowable pressure of
more than 0.5 bar above atmospheric. Flowmeters are considered as piping.
A detailed risk analysis of the flowmeter has been performed in accordance with the PED
2014/68/EU. All risks are assessed to be "none" provided that the procedures and standards
referenced in these operating instructions are observed.
SITRANS FC310
Operating Instructions, 01/2019, A5E44036384-AB
Ex marking
ATEX/IECEx
II 1/2 G
Ex db ia IIC/IIB T* Ga/Gb
II 1/2 G
Ex db IIC/IIB T* Ga/Gb
Ta = -40°C to **°C
* Temperature class (dependent
on the process temperature and
the ambient temperature,
see Special conditions for safe
use (Page 14))
(in preparation)
EHEDG
● 2014/68/EU Pressure Equipment Directive (PED)
● Canadian Registration Number (CRN)
Specification
SD card (S-300u)
4 GB
FAT32 / 8.3
-40 to +85 °C (-40 to 185 °F)
-40 to +100 °C (-40 to 212 °F)
Technical data
11.8 PED
Ex marking
FM/CSA
Ex db ia IIC/IIB T4-T3 Gb
Ex db IIC/IIB T4-T3 Gb
Ta = -40°C to +60°C
Class I, Division 1 Gp A, B, C, D
Class I, Zone 1, AEx db ia IIC T4-
T3 Gb
Ta = -40°C to +60°C
(in preparation)
111