Indicator Lamps - KTM 200 Duke 2017 Owner's Manual

6 CONTROLS
34
6.13.5

Indicator lamps

Possible states
The turn signal indicator lamp flashes green simultaneously with the turn
signal – The turn signal is switched on.
Engine diagnosis warning lamp (MIL) lights up yellow – The OBD (on-board
diagnosis) has detected an emission- or safety-critical error.
The shift warning lights up/flashes red – The set shift speed has been
reached.
The idling speed indicator lamp lights up green – The transmission is in
idle.
The high beam indicator lamp lights up blue – The high beam is switched
on.
The immobilizer indicator lamp lights up or flashes red – Status or error
message for immobilizer/alarm system (optional).
The general warning lamp lights up yellow – An operating safety (warning)
message was detected. This is also shown in the info display.
401686-01