16
TUNING THE ENGINE
16.2
Adjusting the play in the throttle cable
16.3
Checking the clutch lever play
Note
Clutch damage If there is no play on the clutch lever, the clutch will begin to slip.
–
Before operating the motorcycle, always check the clutch lever play.
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve
–
Loosen lock nut
–
Adjust the play in the throttle cable by turning adjusting screw
Guideline
Throttle cable play
–
Tighten lock nut
M00731-10
–
Slide on sleeve
–
Check the clutch lever for smooth operation.
–
Move the handlebar to the straight-ahead position.
–
Pull the clutch lever until resistance is perceptible, and determine the play in the
clutch lever
Clutch lever play
»
If the clutch lever play does not meet the specified value:
–
Adjust play in the clutch lever.
–
Move the handlebar to and fro over the entire steering range.
S00681-10
1
.
2
.
2
.
1
.
A
.
A
3
.
3... 5 mm (0.12... 0.2 in)
1... 3 mm (0.04... 0.12 in)
(
p. 144)
143