KTM 200 Duke 2017 Owner's Manual page 151

17 SERVICE WORK ON THE ENGINE
Main work
–
Remove the oil filler plug
engine oil.
Engine oil (SAE 15W/50) (
Engine oil (SAE 10W/40) (
Info
For optimal performance of the engine oil, do not mix different types of engine
oil.
B00773-10
If appropriate, change the engine oil.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and death.
–
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (
1
with the O-ring from the clutch cover and fill up with
p. 172)
p. 172)
Always make sure there is sufficient ventilation when running the engine.
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
p. 145)
149