Checking The Headlight Setting - KTM 200 Duke 2017 Owner's Manual

14 ELECTRICAL SYSTEM
14.7

Checking the headlight setting

A 0 0 A
–
Position the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
B 0 0 B
Distance
–
Position the vehicle perpendicular to the wall at a distance
on the low beam.
Guideline
400726-10
Distance
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. (
B
under the first mark.
B
A
5 cm (2 in)
A from the wall and switch
5 m (16 ft)
p. 129)
128