KTM 200 Duke 2017 Owner's Manual page 87

11 SERVICE WORK ON THE CHASSIS
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
Main work
–
Shift gear to neutral.
–
In the area of the chain sliding guard, press the chain upward toward the swingarm and
determine chain tension
Info
Upper chain section
Chain wear is not always even, so you should repeat this measurement at differ-
ent chain positions.
Chain tension
» If the chain tension does not meet the specification:
–
Adjust the chain tension. (
–
Remove the rear of the motorcycle from the lifting gear. (
B00731-10
p. 77)
A .
B
must be taut.
5... 7 mm (0.2... 0.28 in)
p. 86)
85
p. 77)