KTM 200 Duke 2017 Owner's Manual page 92

11 SERVICE WORK ON THE CHASSIS
–
Remove screws
S00670-10
–
Check the chain sliding guard for wear.
» If the chain sliding guard has lost material due to wear to the extent that, in
area C
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the screws on the chain sliding guard.
C00199-10
1 , 2 and 3 . Push the chain guard aside.
, drilled hole D is visible from above:
90