Auto Fit Copying - Samsung SCX-6220 User Manual

5
Press Enter to save the selection.
N : You cannot adjust the copy size using the Reduce/
OTE
Enlarge button while making a clone.
6
Press Start to begin copying.
7
When copying is completed, press Special Copy repeatedly
until "Off" appears on the bottom line and press Enter to
cancel the Clone feature.

Auto Fit Copying

A
The Auto Fit feature automatically reduces or enlarges the
original image to fit on the paper currently loaded in the
machine, so you don't need to adjust the copy size.
This special copy mode is only available when using document
scanner glass. If a document is detected in the DADF, the auto-
fit will not work.
1
Load the document to be copied on the document glass,
and close the cover.
2
Make sure that you have selected the required paper tray.
See page 4.2.
3
Press Special Copy to enter the special feature.
4
Press Special Copy repeatedly or the scroll buttons to
display "Auto Fit" on the bottom line of the display.
5
Press Enter to save the selection.
N : You cannot adjust the copy size using the Reduce/
OTE
Enlarge button while Auto fit is enabled.
6
Press Start to begin copying.
7
When copying is completed, press Special Copy repeatedly
until "Off" appears on the bottom line and press Enter to
cancel the Auto Fit mode.
4
C 4.17
OPYING