Samsung SCX-6220 User Manual page 73

4.10
C
OPYING
3
To enter Duplex mode, press Duplex. You can see the
current setting on the bottom line of the display and the
corresponding green LED is lighted.
4
Press Duplex or the scroll buttons until the corresponding
green LED of the desire mode lights. You can choose from:
•1-1 Sided
single-sided copies are required.
•1-2 Sided Long
only and double-sided copies with the conventional layout
used in book binding are required.
•1-2 Sided Short
only and double-sided copies with the type often used with
calendars are required.
•2-1 Sided
single-sided copies are required.
•2-2 Sided
double-sided copies are required.
2
Long Edge
N : In Duplex mode, the Photo setting using the Original
OTE
Type button is disabled.
5
Press Start to begin copying.
6
When the document is fed from the document glass, the
display shows "Scan Side 2?" on the top line after the page
is scanned into the memory. To scan another page, remove
the scanned page and load the next page on the glass.
Select "Yes" and press Enter.
After scanning, the machine starts printing automatically.
Then the display shows "Scan Another?". To scan another
page, select "Yes" and press Enter.
When the display shows "Scan Side 2?" again, repeat as
necessary.
When all of the pages are scanned, select "No" when the
display shows "Scan Side 2?" or "Scan Another?" and press
Enter.
: Originals that are printed on 1 side and
: Originals that are printed on 1 side
: Originals that are printed on 1 side
: Originals that are printed on 2 sides and
: Originals that are printed on 2 sides and
3
5
Short Edge
2
3
5