Auto Fit - Samsung SCX-5312F User Manual

4.8
C
OPYING

Auto Fit

This feature automatically reduces or enlarges the original
image to fit on the paper currently loaded in the prodcut, so you
cannot adjust the copy size.
This special copy mode can be applied when you load document
only using the document glass. So if a document is detected in
the ADF, the Auto Fit does not work.
1
Load the document to be copied on the document glass,
and close the cover.
2
Make sure that you have selected the required paper tray.
See page 4.2.
3
To enter the special copy mode, SCX-5312F users should
press Special Copy in the Copy mode (see page 4.5) and
SCX-5112 users should press Autofit/Clone.
4
Press Special Copy (Autofit/Clone on SCX-5112)
repeatedly or use the navigation buttons until "AUTO FIT"
appears on the bottom line of the display.
5
Press Mode/Enter (Enter for SCX-5112) to save the
selection.
6
If necessary, customise the copy settings incluing the
number of copies, contrast and image type using the
control panel buttons. See "Setting Copy Options" on
page 4.6.
N : You cannot adjust the copy size by using the Zoom button
OTE
while the Auto Fit printing is enabled.
7
Press Copy/Start to begin copying.
8
When the copying is completed, press Stop/Clear to
cancel the Auto Fit mode.