Installing Postscript Drivers - Samsung SCX-6220 User Manual

B.2 U W
SING INDOWS

Installing PostScript Drivers

PPDs, in combination with the PostScript driver, access printer
features and allow the computer to communicate with the
printer. An installation programme for the PPDs is provided on
the supplied software CD-ROM.
Before installing, make sure that the machine and the PC are
properly connected with parallel, USB, or network interface. For
information about:
• connecting with a parallel interface, see page 1.10.
• connecting with a USB interface, see page 1.10.
• connecting with a network interface, see page D.6. You need
to install an optional network interface card; see "Installing a
Network Interface Card" on page D.2.
Installing PostScript Drivers
N
:
OTES
• For Windows NT 4.0/2000/XP, the system administrator should
install the software.
• Cancel the "New Hardware Found" window that appears when
your computer boots up.
• Make sure that your machine is turned on and connected to your
computer's parallel port or USB port before installing
software. Windows 95 and Windows NT 4.0 do not support the
USB connection.
1
Insert the supplied PostScript driver CD-ROM into your CD-
ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:Setup.exe, replacing "X" with the letter
of your drive and click OK.
P S D
OST CRIPT RIVER
(Option)